[Spridgets] electric tach problem

[John Farley]

Martin, I was on vacation when you sent the tach question.  Don’t know if
you solved your problem yet.  One thing I did  was solder a wire connector
on the tach housing and ran a separate wire ground from it.  The ground
provided by the knurled nut was not very good.
John F

On Sat, Jul 27, 2019 at 4:26 PM Martyn Ridley via Spridgets <
spridgets at autox.team.net> wrote:

> Have any of you experienced this? You turn on the ignition and after a
> few seconds the tach jumps to 2500 rpm. Works fine otherwise.
>
> Suggestions etc. please.
>
> Cheers,
>
> Martyn
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/jmfarley61@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20190806/76ab9f89/attachment.html>