[Spridgets] Bottom seal for spindle hub to kingpin

[Hal Faulkner]

Mike,
If it's what I think it is, Frank recommended using a hose washer.
Hal

On Sat, Feb 3, 2018 at 10:11 PM, Michael MacLean via Spridgets <
spridgets at autox.team.net> wrote:

> As some of you know I am re-bushed the front suspension of my Bugeye.
> After collecting what I thought were all the parts I need for the rebuild I
> have run into a problem.  The seal that sits in the recess at the bottom of
> the spindle where the kingpin passes through to seal in the grease was in
> pieces in one spindle and completely missing in the other.  None of the
> usual suspects catalog this seal unless you buy a complete kingpin rebuild
> kit for $125+.  I just need the seal.  Anyone have a partial kit laying
> around or know where I can get the seal or what to use in its place?
> Mike MacLean
> 60 Sprite
> Sent from Yahoo Mail on Android
> <https://overview.mail.yahoo.com/mobile/?.src=Android>
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/spridgets/frog.aye at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20180204/dc125c93/attachment.html>