[Spridgets] Wishbone Pin

[CosmicMag1380]

A long while back, Peter the Parts Pimp had rebuilt A-arms with zirk
fittings on the backsides. Check with him to see if he still handles them.

Kent

On Sat, Aug 5, 2017 at 1:50 PM, Michael MacLean via Spridgets <
spridgets at autox.team.net> wrote:

> When I restored my Bugeye back in 2000, I removed the threaded pins from
> the wishbones in the front suspension and just installed a new pin.  There
> was some wear in the threads in the wishbone at that time, but it had been
> 17 years since then.  I want to replace the wishbones and pins the same
> time I install new bushings.  I remember from quite aways back how it was
> discussed on the list about installing another grease fitting to the blank
> plug end of the threaded socket in the wishbone.  Does anyone have the
> particulars or can point to a web site that talks about this?
> Mike MacLean
>
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/
> cosmicmag1380 at gmail.com
>
>


-- 
Kent
1960 Bugeye
1983 Garage full of spridget parts!
2010 Arrow shed full of excess spridget parts!!!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20170805/4312c6a4/attachment.html>