[Spridgets] Corrosion protectors
dwoerpel
dwoerpel at wi.net
Thu Dec 4 15:41:19 MST 2014
Tim,
I've been using one of these for 20 years. Lot cheaper back then but
look around and you may find one for less. If your battery is too low
place a block of suitably sized wood under the battery. No worries with
corrosion. Here is the Moss page but Victoria British may sell them as
well.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29387&SortOrder=10&gclid=CKu9hJa5rcICFWFgMgodDA0Afw
or use: *http://tinyurl.com/mudjzt3
*Dave W.
'59 :{)
'59 MGA 1500*
*
On 12/4/2014 12:23 PM, Tim Collins wrote:
> Hi folks,
>
> Yesterday I took the battery out of my Sprite to clean all around the
> battery tray and firewall. That area was a problem during the
> restoration in 2008 so I want to keep up with corrosion. I found the
> area to be in great shape. I cleaned up a little bit of dirt and dust
> and then gave the area a good wash with baking soda and water.
>
> When I installed the battery in '08. I used some of those Christmas
> colored Terminal Corrosion Protectors. I don't know if they did a
> spectacular job of preventing corrosion or if the liberal dose of
> dielectric grease did the job - or both. Anyway, I got to wondering
> how long those terminal protectors last. I did pick up new protectors
> at the parts store today, but haven't been able to find any
> instructions that say how long they last. Checked the Internet and
> didn't find anything there.
>
> Does anyone know how long terminal protectors are good for before they
> go terminal? (Autocraft Part # AC619)
>
> Tim
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/dwoerpel@wi.net
More information about the Spridgets
mailing list