[Spridgets] Quarter elliptic cars question

dwoerpel dwoerpel at wi.net
Sun Jul 29 16:30:17 MDT 2012


Please delete one of the "s" 's from either "questions" or 
"needs"....can't type and watch the Olympics at the same time!  :(

On 7/29/2012 5:26 PM, dwoerpel wrote:
> Hi Phil,
>
> Great questions that needs list input.
>
> #17606's spacers are mounted at the axle end of the top link (only end 
> it can go) and INBOARD of the link.  I remember going through the same 
> quandary as AKD 3566 Plate L1 Page ML 2
> makes it look like they should be outboard.  The only way mine would 
> fit and measure square (perpendicular as Peter said) is on the inboard 
> side.  Please correct me if this in not right.
>
> This is when I found out that the right rear wheel looked like it was 
> out closer to the wheel well lip than the left side.  Anyone else run 
> into this??  Whatever, the car tracks straight and doesn't pull and 
> the tires wore evenly.
> I figured The Works offset the axle to one side to compensate for the 
> massive torque steer from my stock 948!  ;-)
>
> Dave W.
>
>
> On 7/29/2012 12:40 PM, Phil Nase wrote:
>> On the rear attachment for the radius arm does the spacer go on the 
>> inboard or
>> outboard side of the bush?
>> Thanks.
>>
>> Phil Nase
>> Applebachsville, PA
>> http://home.comcast.net/philnasecpa/
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/spridgets/dwoerpel@wi.net


More information about the Spridgets mailing list