[Spridgets] Running rough - Now electrical question
Robert Weeks
lists at woozy.com
Sat Oct 29 17:26:52 MDT 2011
Thanks Peter,
The fast idle screws are all the way out. The only way I can get the
idle down is to disconnect the hose to the crankcase breather or open
the oil filler cap. If I do either of those the idle drops way down.
Robert
On 10/29/2011 7:14 PM, Peter Caldwell wrote:
> Robert,
> I've seen a rash, rash I tell you, of fast idle screws screwed in
> too far yielding a fast idle! It's the screw on the backside of the
> throttle linkage.
> Peter C
More information about the Spridgets
mailing list