[Spridgets] Running rough - Now electrical question
Peter Caldwell
peter at nosimport.com
Sat Oct 29 17:14:01 MDT 2011
Robert,
I've seen a rash, rash I tell you, of fast idle screws screwed
in too far yielding a fast idle! It's the screw on the backside of
the throttle linkage.
Peter C
----
At 04:59 PM 10/29/2011, Robert Weeks wrote:
>Hi All,
>One other thing, I can't get the car to idle at the recommended 800
>- 1000 RPM. With the idle adjuster screws close to all the way out
>it idles around 1500 RPM. I noticed that the idle will drop way down
>if I remove the oil cap. Then I noticed that there is no PCV valve
>in the hose that comes off the carbs to the crankcase breather.
>Would installing a PCV valve help bring down the idle? If so does
>anyone know what PCV from a modern car would work if I can't find
>one of the original PCV valves?
>
>Thanks,
>
>Robert
More information about the Spridgets
mailing list