[Spridgets] sending unit

[corvallis at peoplepc.com]

There should be a resilient gasket with your sending unit. Most gasket
sealer will soften or dissolve with gasoline, especially the newer blends.
...bill in corvallis
=====================================================
-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of Jess Power
Sent: Monday, October 03, 2011 4:37 PM
To: spridgets at autox.team.net
Subject: [Spridgets] sending unit

    I am placing a new fuel tank and sending unit in my bugeye.I plan  
to ground the unit from one of the screws that holds it on the tank to  
the nuts on the gas tank,and one wire lead from the sending unit  
itself to the hole on the bottom side of the body where it will  
connect to the wire harness.Does this sound correct? The nut on the  
sender will be facing toward the front of the car.Do I need to place  
gasket sealer on the sending unit? Are there any other wire  
connections needed before I install the gas tank?
_______________________________________________