[Spridgets] Bugeye/Frogeye Club..... SU question for racer types...

[Lester]

This begs another question, are those bits interchangeable?  Or are
they carb model specific?

Thanks again,

Lester


On Nov 11, 2010, at 10:06 AM, erik nyce wrote:

> The question is "can the motor as built rev quick enough to keep up
> with the fuel air mix as the throttle is advanced."   When you
> rapidly advance the throttle does it sputter and then catch?   If it
> does not then you are ok.   Since you are sorting it out you may
> wish to try it both ways and see which you like better.
> I wonder without knowing if the lack of dampers changes the gas
> mileage...
>
>
> Hi all,
>
> so I have the 1380 in the Bugeye and I still have some fine tuning to
> do but I noticed one thing right off the bat, there are no pistons on
> the carb caps. If you unscrew the cap there is only a rod with no
> brass bit. I'm guessing that this is a go fast racer mod to allow a
> much faster throttle response but is it practical on the street?
>
> Thanks for you input,
>
> Lester
> ey Bugeye Frogeye Sprite Club, please send a blank email to:
bugeye-unsubscribe at yahoogroups.com
>
> If you no longer want to receive emails, but wish to remain a member
> of the group, you may go to the website
http://groups.yahoo.com/group/bugeye/
>  and change your subscription to "Web Only" and you will not receive
> any emails.
> Switch to: Text-Only, Daily Digest  Unsubscribe  Terms of Use
> .
>
> __,_._,___