[Spridgets] Question Speedo Cable

[Jack Laird]

1968 on uses a shorter cable all others are the same.


----- Original Message ----- 
From: "Kirk Hargreaves" <khargreaves2 at gmail.com>
To: <spridgets at autox.team.net>
Sent: Saturday, May 22, 2010 9:09 PM
Subject: [Spridgets] Question Speedo Cable


> When I changed out the smooth case to a rib case I lost my speedo.  The
> cable will turn the speedo when attached to an electric drill. .  but does
> not want to "shake hands" with the gear box.   It is tightened in as far 
> as
> it will go.
>
> So I would take from this that I need a different cable, ie. one that will
> match the rib case gear box. .  and also match the back of the speedo 
> dial.
>
>
> I guess that the smooth case cables had a different engagement situation 
> as
> they are screwed into the gear box compared to the rib case.
>
> Or.  . I could hook my cordless drill up to it and attach a vacuum line 
> from
> the engine to pull the variable speed trigger on the drill.  . and try to
> dial it in so that it is as close as possible to the correct speed?
> Probably be easier to replace the cable. .
>
> Kirk
> 59 1275
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/spridgets/jlaird237@cox.net
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.819 / Virus Database: 271.1.1/2889 - Release Date: 05/22/10 
01:26:00