[Spridgets] Fw: Delivery Status Notification (Failure)

Robert E. Shlafer pilotrob at webtv.net
Sun Sep 13 14:00:50 MDT 2009


-----Original Message-----
From: postmaster at mail.hotmail.com
Sent: Sunday, September 13, 2009 3:59 PM
To: pilotrob at webtv.net
Subject: Delivery Status Notification (Failure)

This is an automatically generated Delivery Status Notification.

Delivery to the following recipients failed.

       Spridgets at autox.team
Reporting-MTA: dns;bay0-omc2-s39.bay0.hotmail.com
Received-From-MTA: dns;hotmail.com
Arrival-Date: Sun, 13 Sep 2009 12:59:35 -0700

Final-Recipient: rfc822;Spridgets at autox.team
Action: failed
Status: 5.4.0
Received: from hotmail.com ([207.46.8.148]) by
  bay0-omc2-s39.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959);
  Sun, 13 Sep 2009 12:59:35 -0700
Received: from mail pickup service by hotmail.com with Microsoft
  SMTPSVC; Sun, 13 Sep 2009 12:59:35 -0700
Message-ID: <BAY118-DAV10C3772DD7696612721115C8E50 at phx.gbl>
Received: from 209.240.205.116 by BAY118-DAV10.phx.gbl with DAV; Sun, 13
  Sep 2009 19:59:30 +0000
X-Originating-IP: [209.240.205.116]
X-Originating-Email: [pilotrob at webtv.net]
X-Sender: pilotrob at webtv.net
From: "Robert E. Shlafer" <pilotrob at webtv.net>
To: Phil Nase <nases at verizon.net>, spridgets Spridgets at autox.team. Net
  <spridgets at autox.team.net>
Subject: Re: [Spridgets] gear reduction starter
Date: Sun, 13 Sep 2009 19:59:30 GMT
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-OriginalArrivalTime: 13 Sep 2009 19:59:35.0063 (UTC)
  FILETIME=[B7788A70:01CA34AC]
Return-Path: pilotrob at webtv.net

It did on mine. :)

One thing with GR starters. Make sure your battery is up to snuff "dynamically" (test it under load every now and then) or, you can burn the contacts out in the GR starter's solenoid in no time at all. 

Ask me how I know??! :)
 

Cap'n. Bob      '60 :{)


-----Original Message-----
From: Phil Nase
Sent: Sunday, September 13, 2009 12:24 PM
To: spridgets Spridgets at autox.team. Net
Subject: [Spridgets] gear reduction starter

I'm installing a gear reduction starter on my bugeye.  The seller says  
it's OK to bypass the starter internal solenoid with a jumper wire to  
the other battery wire.  Will it work on spridget with the stock  
starter switch with the bypass?  What are you guys doing with the  
wiring?

Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa/
You are subscribed as pilotrob at webtv.net

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets


More information about the Spridgets mailing list