[Spridgets] Venting... a 1275 w/ Weber
Frank
spritenut at comcast.net
Wed Nov 11 20:01:02 MST 2009
Peter Caldwell wrote:
> How are y'all accomplishing crankcase venting with a side draught
> Weber on a 1275?
I drilled a hole in each side of the intake, ran a hose to a Y and then
to a stock Smiths PCV valve.
It has worked well for years.
I had a Cannon intake and it had 1 spot for a vacuum port but this
caused 2 cylinders to run lean.
I took the vacuum off each tube and all was well.
--
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
More information about the Spridgets
mailing list