[Spridgets] Removing nut from tie rod

[Greg Mahney]

This is perfect for the proposed website/book on stuff people know!

Greg


On Fri, May 22, 2009 at 12:06 PM, Hendricksen Matt <
Matt.Hendricksen at us.qbe.com> wrote:

> Hi all,
>
> Trying to replace the gaiters on my steering rack.  Thought I'd replace the
> tie rod ends as well since the rubber on those was looking shabby.
>
> I'm having trouble with the nut that's between the tie rod end and tie rod.
>  I
> tried penetrating oil, a BFH and heating up the nut but nothing seems to
> work.
> Thought about using a nut splitter, but worried about screwing up the tie
> rod.
>
> Matt
> '65 Sprite
> Madison, WI
>
> ______________________________________________________________________
> This electronic message from QBE the Americas and any attachment to it is
> intended exclusively for the individual or entity to which it is addressed.
> It
> may contain information that is privileged, confidential and exempt from
> disclosure under applicable law. Any unauthorized disclosure, copying,
> distribution or use of this electronic message or any attachment is
> prohibited. If you have received this message in error, please return it to
> the sender and delete this original from your system.
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as mahney at gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets