[Spridgets] Differentials & Parts up for Grabs

[Jay Fishbein]

Thanks Ron,

If anyone is interested, I am clearing-out some iron and larger items. If anyone is interested, I want to get rid of:

Vertical Flow radiators,
Early and later Mk II dashboards (With radio cut-outs intact)
wire wheel rear ends,
Lower A arms - needing rebuild
differentials (Ratios to be determined)
Early square body front fenders and hood
1275 emissions engine
1098 engine
lots of HS2 carbs
HS2 heatshields
early and last heater boxes
Midget radio console (70's)
Midget steering wheel (70's)

--- On Tue, 6/30/09, Ron Soave <soavero at yahoo.com> wrote:

From: Ron Soave <soavero at yahoo.com>
Subject: Re: [Spridgets] Differentials
To: "Jay Fishbein" <jfishbein at snet.net>
Date: Tuesday, June 30, 2009, 12:19 PM


It should have the ratio marked on the housing in the same manner as the ring gear, 9/38 is 4.22, 10/39 is 3.9, etc.

--- On Tue, 6/30/09, Jay Fishbein <jfishbein at snet.net> wrote:

> From: Jay Fishbein <jfishbein at snet.net>
> Subject: [Spridgets] Differentials
> To: spridgets at autox.team.net
> Date: Tuesday, June 30, 2009, 10:11 AM
> ANyone know the coding on the outside
> of the diff's for specific read-end ratios?
> 
> Jay Fishbein
> Wallingford, CT 06492
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as soavero at yahoo.com
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/spridgets