[Spridgets] blown frost plug

[Peter Caldwell]

NO SILICONE!

At most use a hardening sealant like Permatex 1

Peter C
==
At 07:40 AM 7/26/2009, Greg Higgins wrote:
>I had removed all of the frost plugs a couple of years ago, the block was
>boiled, and the engine was freshened up. I used some automotive silicone on
>the new frost plugs. My question, should I install the new frost plug dry, or
>try the silicone again?
>Thanks for any info
>
>Greg Higgins
>63 sprite