[Spridgets] Ed Iskenderian Racing Cams' letter re: oil
David Riker
davriker at nwi.net
Wed Jul 22 22:29:03 MDT 2009
So when is somebody going to make retrofit roller lifters for the a-series
engine and be done with all this?
David R.
----- Original Message -----
From: "Bud Osbourne" <abcoz at hky.com>
To: "Spridgets" <spridgets at autox.team.net>
Sent: Wednesday, July 22, 2009 7:28 PM
Subject: [Spridgets] Ed Iskenderian Racing Cams' letter re: oil
> "Please note, Isky does not recommend the use of synthetic oils with any
> flat
> tappet camshaft - especially during break-in. If you must use synthetic
> oil
> after break-in, there are only two brands we are comfortable recommending.
> They are Amsoil (Red) Racing Oil and Joe Gibbs Performance Racing Oil.
> Both
> contain zinc and phosphorous and will fare well AFTER break-in has been
> successfully completed. Other synthetics, especially those with very low
> viscosity index numbers (i.e. 0w-15, 5w-20 etc.) have very low film
> strength
> and are not designed for, nor should they be employed in any flat-tappet
> cam
> installation."
More information about the Spridgets
mailing list