[Spridgets] My students high school project for the Spritdget...comments needed.

[dwoerpel at wi.net]

Linda,

Awesome learning project.  I see an entrepreneurial opportunity here.  My
daughter actually took a class in high school where students r&d'd a
product (floor cleaner and wax).  They then pitched it and sold it to
develop the program.  The teacher actually owns a store and sells the
products.  Talk about interdisciplinary learning!

OR, just set up a sweat shop and have the kids work for your cottage
industry. ;-)

Dave W.
59 :{)  What bonnet support problem??? ;-)



> GREAT IDEA!  How about a project to design hood and trunk telescopic
> adaptations for the 66 Midget rod supports.  Could they design and
> configure
> using available parts?  I, for one, would pay for that!  Anyone done this
> yet?
>
> Vinny
>
> 66 Midget
>
> 80 "B"
>
>> Date: Fri, 18 Dec 2009 10:50:54 -0500
>> From: grunthaner at gmail.com
>> To: spridgets at autox.team.net
>> CC: michael_creech at hths.mcvsd.org; allen_bale at hths.mcvsd.org
>> Subject: [Spridgets] My students high school project for the
> Spritdget...comments needed.
>>
>> List,
>> I have 2 students who may be using one of our Spridget problems for
>> their
>> senior project, "pulling the hood support rod off the hood". My students
>> project is due on January 21st and needs to be documented as a real
> problem,
>> as well as have tested the solution repeatedly. Being their first
>> problem
> to
>> solve for their senior design project may not be completed on time they
> will
>> need a new problem so I gave them the problem that I know has been
>> documented since the first 61/62 Sprite drove out of the factory, which
>> is
>> pulling the hood support rod off the hood. For those of you who have a
> 61/62
>> Square body Sprite you know what I'm talking about.