[Spridgets] Fel-Pro gaskets

Bud Osbourne abcoz at hky.com
Wed Apr 15 18:02:32 MDT 2009


Yes, I've heard about Hylomar before.  Haven't tried it, but have 
experienced it on a Porsche engine I was installing for a friend.  Good 
stuff, I know.
But, Derf, I'm GONNA use the Fel Pro gasket, this time ;)
Thanks.
Bud
----- Original Message ----- 
From: "derf" <derf247 at gmail.com>
To: "Bud Osbourne" <abcoz at hky.com>
Cc: "Paul Asgeirsson" <PAsgeirsson at worldnet.att.net>; "Spridget Chat Group" 
<spridgets at autox.team.net>
Sent: Wednesday, April 15, 2009 7:57 PM
Subject: Re: [Spridgets] Fel-Pro gaskets


> OK, but have you used Hylomar?  It is good stuff.  A little goop to
> hold the gasket to the valve cover and a little Hylomar between the
> gasket and the head and you can remove and replace the valve cover
> many times.  You may have to use a little more Hylomar after 2 or 3
> removals,
> but it will seal and it won't stick the gasket to the head.
> Hylomar = Good stuff.
> You should look into it.  If you don't like it, you still will know a
> little more than you did before about it.


More information about the Spridgets mailing list