[Spridgets] Fel-Pro gaskets

[derf]

OK, but have you used Hylomar?  It is good stuff.  A little goop to
hold the gasket to the valve cover and a little Hylomar between the
gasket and the head and you can remove and replace the valve cover
many times.  You may have to use a little more Hylomar after 2 or 3
removals,
but it will seal and it won't stick the gasket to the head.
Hylomar = Good stuff.
You should look into it.  If you don't like it, you still will know a
little more than you did before about it.