[Spridgets] Rusty Bits...

Mark A. O'Neil mark.a.oneil at dartmouth.edu
Fri Apr 10 06:19:05 MDT 2009


Sorry all, I subscribe to the digest, and neglected to change the  
subject line....

I use Kroil penetrating oil - have most of a gallon jug that has  
lasted for a few years - apply with brush or old windex spray bottle.

That and patience does the trick 80% plus of the time for me.

Now for more coffee...

-m

On Apr 09, 2009, at 6:57 PM, Andrew Payne wrote:

> I have been removing parts, with much frustration.  Several parts  
> have come
> off only with the use of my 24 tooth per inch "screw driver".  WD-40  
> is not
> enough.  Any suggestions on techniques to free rusty screws and  
> bolts?  I
> have heard to use a blow torch, but was afraid to use one on lights  
> and
> such.  Please help, I am tired of the hacksaw.
>
> Drew
> ________


More information about the Spridgets mailing list