[Spridgets] Seats

[corvallis at peoplepc.com]

I'm surprised more of us don't admit to this problem. I've taken a pine
board and attached a plastic bucket seat (bar stool) from the 1960's-1970's.
The whole thing is held in place by the seat belt around me. ...bill in
oregon
==================================================================
-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of Kirk Hargreaves
Sent: Thursday, April 09, 2009 1:56 PM
To: spridgets at autox.team.net
Subject: [Spridgets] Seats

Has anybody on the list moved their driver seat back a couple of inches past
the rear bulkhead in order to get further away from the steering wheel
whilst driving>

I have been tempted to either play with the bulkhead behind the seat (cut
and weld) or do something to the back of the seat so that I can set the
rails a bit further back.

At 6' my leg room is still good as is.  I just do not like being so close to
the steering wheel.

My car is a nice daily driver. .  not worried about keeping it at show room
stock level.

Kirk
59 BE
_______________________________________________