[Spridgets] Engine pull

[rrengineer at dslextreme.com]

All I have is a 3/8ths to 1/2 inch adapter ground down to fit the hole. 
Just put it on my 3/8ths ratchet and it works perfectly and does not take
up much room at all in the socket drawer.  You can buy an adapter at
Horrible Fright for next to nothing.

Mike MacLean
60 Sprite
56 BN2

David Lieb
>> 3/8th drive works for me and always has. Thought it was what we were
>> supose
>> to use. shrug.
>
> 3/8th works if nothing is stuck. When you have one that does not want to
> budge, it simply laughs at the 3/8th. I also use Brad's concept. I bought
> a
> cheap 1/2" extension, the shortest one they had, took it over to the
> grinder
> and tapered the end until it was a perfect snug fit in the plug. Pop it
> onto
> the impact wrench and it gets those bad boys right out for me. I generally
> use it with a ratchet to put the plugs back in so as not to get them so
> tight I need to escalate everything up another notch to get them out next
> time.
> David Lieb
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as rrengineer at dslextreme.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets