[Spridgets] Webber 40 side draft - Question

[Larry & Sandi Miller]

Here is a link to a page with various combinations of engine and Weber(s)

http://www.teglerizer.com/dcoe/dcoepictures.htm

----- Original Message ----- 
From: <uniquelittlecars at yahoo.com>
To: "Vigil" <uniquelittlecars at yahoo.com>
Cc: "spridgets" <spridgets at autox.team.net>; "Morris Motors" 
<morris_motors at yahoogroups.com>; "Sprite" <bugeye at yahoogroups.com>; 
"Midget/Sprite" <midgetsprite at yahoogroups.com>
Sent: Sunday, July 06, 2008 4:57 PM
Subject: [Spridgets] Webber 40 side draft - Question


>
>
> Group,
>
> Any one out there running a Weber 40 side draft carb.
> I would like to find out what you are using in the set up. I am hoping to 
> find
> some one with a street motor. I am putting the manifold and carb on a what 
> is
> thought to be a stock 1275cc motor. To many owners before him to know for
> sure. But it does not sound like it has a cam and the head looks stock. I 
> know
> there are several variables when setting up a Weber. I just need some 
> setting
> for reference points. needles, jets and any thing else you feel would put 
> me
> in the right direction.
>
> Thanks again,
>
> Vigil
> So Cal
> Vigil
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as millerls at ado13.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets