[Spridgets] Can't get new engine to fire cont.

[Lester]

Remember first reply.. dizzy is 180 degrees out... guess what, dizzy  
is 180 degrees out..

Lester


On Aug 10, 2008, at 9:31 AM, Joe Lansing wrote:

> OK - I tried using a plug wire straight to #1 from coil. It did not  
> fire. I pulled the plug and turned it over, and there was spark at  
> the gap. I'll try a new coil. But one question - could my engine  
> builder have re-assembled with the cam so far out of time with  
> everything that it won't run? I'm pretty sure it isn't, as when #1  
> is TDC, both valves for #1 are open, distributor drive shaft slot is  
> at 2:00.