[Spridgets] Distributor drive spindle install

[Joe Lansing]

Duhhh...what retainer?


-
> Tie a string to your bolt, and don't remove the bolt
> without the retainer in
> place.
> 		Crash  
> 
> -----Original Message-----
> From: spridgets-bounces+dwramsey=att.net at autox.team.net
> [mailto:spridgets-bounces+dwramsey=att.net at autox.team.net]
> On Behalf Of Joe
> Lansing
> Sent: Friday, August 08, 2008 5:13 AM
> To: Spridgets
> Subject: [Spridgets] Distributor drive spindle install
> 
> Is there something special or critical in how the drive
> spindle is inserted
> for the distibutor? I'm using a longish bolt to insert
> it into the hole,
> kinda feeling my way intil it slips into the hole in the
> boss in the block
> and the gears mate. Should I do something different?
> 
> Joe
> 
> 1275 in a 62
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as dwramsey at att.net
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/spridgets