[Spridgets] Oil Cooler

[Bob Van Kirk]

Michael,
  Use the lines from an MGB, long enough to run them along the inside fender well.  Makes for a much neater appearance....  Fittings are all the same.  I'd just replace the oil cooler...
Bob


--- On Thu, 4/24/08, Michael Rowe <mdrowe at optonline.net> wrote:

> From: Michael Rowe <mdrowe at optonline.net>
> Subject: [Spridgets] Oil Cooler
> To: "Spridget Chat Group" <spridgets at autox.team.net>
> Date: Thursday, April 24, 2008, 8:23 PM
> My oil cooler has a hole in it at the base one of the
> fittings, probably from twisting a frozen nut.  It may be
> weldable if it could be gotten clean enough.  Any thoughts?
> 
> Also, the hoses that came on it are very short, maybe
> because they have been cut in the middle and pieced back
> together or because they are not standard.  I would rather
> have longer ones, but the catalogue does not specify
> lengths.  Are there choices in lengths or DIY kits that can
> be cut as desired?
> 
> Michael Rowe
> Long Island, NY
> 


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ