[Spridgets] Carbs and door hinge screws

lindalnhvt at nhvt.net lindalnhvt at nhvt.net
Tue Apr 22 19:23:05 MDT 2008

I'm looking for a souce for the door hinge phillips screws that secure the
hinge to the A post. I can find the thread, but only in a hex head bolt.
The buguye doors need a phillips screw.

Next --- Where do I look for step by step directions for adjusting the
carbs. I got the 66 out of storage yesterday and after some effort, got it
started and it ran pretty well on the 15 minute ride home.  I took it out
again last night when the engine was still warm and it started right away,
with a bit of sputtering, but not too much. I tried to start it this
morning when it was 37 degrees and again tonight when it was 55 degrees,
but it won't catch, or even start to catch, when I turn it over. Air
filters are off, pistons move freely and it smells like it's getting fuel.
I need help to get it running and to stay running.
Dick B. in NH

More information about the Spridgets mailing list