[Spridgets] Help with clutch problem...
TMHEFFRON at aol.com
TMHEFFRON at aol.com
Mon Jul 16 09:58:17 MDT 2007
In a message dated 7/16/2007 10:53:20 AM Central Daylight Time,
dbl at chicagolandmgclub.com writes:
Anyone know the normal travel range of the slave
>> piston?
> 5/8 to 3/4 inch.......
So it sounds as if the travel of the piston is in the right range. That
would leave slop in the pivot, bent arm, wrong arm for the application,
bad/worn throwout, defective cover, and other worn parts as logical
suspects.
Hi David:
Pressure plate - clutch disc and TO bearing are all new - didn't seem to be
any slop in the pivot - this is the same transmission that was working just
fine with 1098 clutch setup - do you need to change pivot arm for change to
1275 clutch? Would it be worth it to try and take almost all the free play out
at the master? TIA.
TuTone
************************************** Get a sneak peak of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
More information about the Spridgets
mailing list