[Spridgets] Miss that is killing me

[MICHAEL CARPENTER]

Thanks, Bill.

The new XR700 set-up actually has a red strobe that lights up so that 
setting the shutter is even easier.  It looks to be set up right and the 
engine even runs but just doesn't fire on the first wire/plug.

Mike
----- Original Message ----- 
From: "Bill L" <pythias at pacifier.com>
To: "MICHAEL CARPENTER" <MAIL4CARPENTERS at peoplepc.com>
Cc: "Spridgets" <spridgets at autox.team.net>
Sent: Wednesday, July 04, 2007 12:53 AM
Subject: Re[2]: [Spridgets] Miss that is killing me


> Hello MICHAEL,
>
>       if you have the instructions for the crane then you know you
>       can tape the plug wire to the side of the block with about 3/8"
>       gap FROM the block, spin the dizzy (or loosen the optic eye and
>       move that.. its how you set the initial timing) so that the
>       shutter moves past the eye and you should get spark.. you can
>       do static timing by using #4 cylinder instead of #1 as they
>       are 360 degrees apart in firing.... if you can get #4 to arc,
>       you should be able to TEST #1!...
>
>
>
>
> -- 
> Best regards,
> Bill                            mailto:pythias at pacifier.com
>   "66 Sprite