[Spridgets] Dipstick 1275cc engine

[Daniel1312 at aol.com]

Hi list,

My new engine is a 12V casting with a steel dipstick tube.  The dipstick I 
have for it is the earlier type and is also apparently a 45 degree USA dipstick. 
 The parts are a mismatch and I know the dipstick will rattle.  There is a 
rubber washer on the dipstick but it isn't going to do much.  My parts books 
don't give a number for a later dipstick - does anyone know if the Mini/whatever 
dipstick will be a better fit or if there is a tapered rubber washer that will 
work more effectively than the flat washer listed in the parts books.

Regards

Daniel1312