[Spits] Hub Puller

[Joe Curry]

Anyone within driving distance of me (southern AZ) is welcome to borrow my
original Churchill tool.  It is so heavy that shipping it anywhere is way
too expensive.
Joe C.

-----Original Message-----
From: spitfires-bounces+spitlist=cox.net at autox.team.net
[mailto:spitfires-bounces+spitlist=cox.net at autox.team.net] On Behalf Of
jerry.stasyszen at sbcglobal.net
Sent: Saturday, April 05, 2008 9:37 AM
To: 'SpitfirePat'; Spitfires at autox.team.net
Subject: Re: [Spits] Hub Puller

If you actually get that thing to work you are very lucky. I made on out of
steel plumbing flanges and 2" x 4" pipe nipple. No amout of hammering with a
ball ping or two pound hammer would budge the hubs. Luckly a local Triumph
club member had an actual Churchill hub puller tool. I broung the axle to
him and he had the hub of in about two minutes. I would try to find a local
Triumph club and see if one of their members could help out, you will be
glad you did.

OKCSpitfire at sbcglobal.net