[Spits] Hub Puller

[jerry.stasyszen at sbcglobal.net]

If you actually get that thing to work you are very lucky. I made on out of
steel plumbing flanges and 2" x 4" pipe nipple. No amout of hammering with a
ball ping or two pound hammer would budge the hubs. Luckly a local Triumph
club member had an actual Churchill hub puller tool. I broung the axle to
him and he had the hub of in about two minutes. I would try to find a local
Triumph club and see if one of their members could help out, you will be
glad you did.

OKCSpitfire at sbcglobal.net  

-----Original Message-----
From: spitfires-bounces+jerry.stasyszen=sbcglobal.net at autox.team.net
[mailto:spitfires-bounces+jerry.stasyszen=sbcglobal.net at autox.team.net] On
Behalf Of SpitfirePat
Sent: Saturday, April 05, 2008 10:43 AM
To: Spitfires at autox.team.net
Subject: Re: [Spits] Hub Puller

http://www.triumphspitfire.com/puller.html

A 2nd link at the bottom of that page

Good luck

Pat
Spitfires at autox.team.net
http://autox.team.net/mailman/listinfo/spitfires

http://www.team.net/archive

No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.22.6/1360 - Release Date: 4/4/2008
6:02 PM
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.22.6/1360 - Release Date: 4/4/2008
6:02 PM