[Shop-talk] [TR] Scissor Lift

[DAVID MASSEY]

My TR6 is lowered slightly (Ted's lowered springs) and I have no issues sliding the Quick Jack lifts under the frame from the side.  But if I want to use a trolley jack under the front cross member I need to use another one under a frame rail to get enough clearance.  
My lifts warn not to drive over the lifts so I've never tried it.

Dave 


 

    On Monday, May 6, 2024 at 08:06:39 PM CDT, David Friedlander <forzion7 at gmail.com> wrote:  
 
 I imagine one would have to back a TR6 onto a scissors lift. The front end clearance if. TR 6 with an air dam is probably not more than 3”. And, I expect, every Triumph has a different ground clearance… some being very challenging to get a lift or even a floor jack under them….
Dave
On Mon, May 6, 2024 at 8:44 PM Jeff Scarbrough <fishplate at gmail.com> wrote:



On Mon, May 6, 2024 at 4:00 PM DAVID MASSEY <dave1massey at cs.com> wrote:

I have the 3500 model and it fits between the wheels on a TR6.  (I measured before ordering.)  I don't know if the spitfire has a shorter wheelbase but if it does you might have issues here as it just barely fits within the TR6 wheelbase.  

"Wheel Spread" on the TR6 is 68" and 62" on the Spitfire. ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20240507/095939ee/attachment.htm>