[Shop-talk] flood light extension (Steven Trovato)

[Brian Kemp]

Check local codes.  My city does not allow junctions in pull boxes like 
these.  I had several to change angles or in the middle of long pulls 
and had to open the cover for the building inspector.

Brian

On 6/5/2024 12:49 AM, Mark Miller wrote:
>
> If the wires aren't long enough you can extend it with a piece of 
> threaded conduit and pipe plus a type C conduit body you can make the 
> connection in: 
> https://www.lowes.com/pd/Sigma-Electric-ProConnex-1-2-in-Rigid-Conduit-Body/3389356
>
>
> Regards,
>
> Mark Miller   707-490-5834
> markmiller at threeboysfarm.com
>> Outside my shop I have a typical flood light with two of these:
>>
>> https://www.lowes.com/pd/Sigma-Electric-2-25-in-LED-Gray-Switch-Controlled-Floodlight/3136837
>>
>> Is there any way to extend the part with the threaded end?  Through
>> some bad planning, one of the lights is blocked by the gutter
>> downspout.  I would like to extend it out from there.  If the wires
>> need to be longer I can figure out how to do that.  Whatever I do
>> will have to be suitable for outdoor use.  Moving the downspout would
>> be difficult.  I can also relocate the whole light, but some sort of
>> extension arm would be the quickest and easiest solution of it is
>> possible.  Thanks.
>>
>> -Steve T.
>>
>>    
>>
>>
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate:http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive:http://www.team.net/pipermail/shop-talk  http://autox.team.net/archive
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/shop-talk/bk13@earthlink.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20240605/cea10f39/attachment.htm>