[Shop-talk] adjustable thread dies

[Thomas Coradeschi]

I forgot about thread files. It’s a 12-24 stud, so you’d want a 24TPI file, no?

—
Tom Coradeschi
tjcora at icloud.com


> On 17 Sep 2022, at 3:32 PM, Pat Horne <patintexas at icloud.com> wrote:
> 
> See if you can find a 12TPI thread file. You start filing where the threads are mostly good & keep filing over the damaged threads until you reach the end. If you want to, you can then run a standard 12-24 die onto it afterwards.  I got a set of SAE & metric decades ago from J. C. Whitney - May they Rest In Peace. 
> 
> Peace,
> Pat
> 
> Pat Horne 
> We support Habitat for Humanity
> 
> 
> On Sep 17, 2022, at 1:55 PM, john niolon <jniolon at att.net> wrote:
> 
> 
> Help machinist and mill wright type people
>  
> I have a output stud in an alternator case that the beginning threads are stripped/galled/messed up from someone trying to force a metric nut on it.  the stud is about
>  5/8"  long and the majority of the threads are good.
>  
> I can't seem to get a 12-24 die started so I know it will true up the existing threads.   I see they make adjustable dies on the net... can I use that to slide over the bad threads 
>  
> the adjust the bolt in the die to sit right on the stud then thread it back over the bad threads ??   I just hate to send 20 bucks for the die if it won't do what I want...
>  
> Any experience doing this ??
>  
> thanks
> john
> _______________________________________________
> 
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com
> 
> _______________________________________________
> 
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/tjcora@icloud.com
>