[Shop-talk] PITA to remove screw in bulbs

[DAVID MASSEY]

 Yes, you can use dielectric grease. Any kind of grease will reduce the friction between the bulb base and the socket.
 
Dave 


 
 
-----Original Message-----
From: Tim . <tims_datsun_stuff at outlook.com>
To: Shop Talk <shop-talk at autox.team.net>
Sent: Thu, Jun 16, 2022 2:53 pm
Subject: [Shop-talk] PITA to remove screw in bulbs

 #yiv1308029979 P {margin-top:0;margin-bottom:0;}Mostly in ceiling fans.....I have a hard time removing screw in bulbs. They are very hard to turn and at least once I've had the bulb twist out of its mount leaving the male end in the fixture. 
Can I use di-electric grease on light bulbs? If not, is there something else that I can use to make it easier to remove bulbs?
thanks_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/dave1massey@cs.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20220616/5d0cebb1/attachment-0001.htm>