[Shop-talk] blast cabinet issue

[Tim .]

There is media around the intake.

I like the idea of that vibrator if I can find one. What you shared is not available.

________________________________
From: Darrell Walker <darrellw360 at mac.com>
Sent: Thursday, February 10, 2022 2:40 PM
To: Tim . <tims_datsun_stuff at outlook.com>
Cc: Shop Talk <shop-talk at autox.team.net>
Subject: Re: [Shop-talk] blast cabinet issue


Is the intake getting blocked, or is there just not media around the intake (duning)?

If it is the latter, I added a vibrator to my setup, it makes sure the media keeps flowing down.

https://www.amazon.com/gp/product/B07MFRVKNV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

-Darrell

On Feb 10, 2022, at 12:33 PM, Tim . <tims_datsun_stuff at outlook.com<mailto:tims_datsun_stuff at outlook.com>> wrote:

Hey all,

I have a stand-up HF blast cabinet pushed by a single stage Porter Cable 80-gallon compressor. The compressor runs almost constantly but keeps up just fine. My air is not the driest but I rarely see moisture being blasted on to the metal unless it is summer and more humid.

I am currently using "black blast" from Menards on a 50+ year old drive shaft. It is rusty but is coming clean relatively easy....kinda....

My issue is I get about 20-45 second of real good and quick cleaning/blasting then the stream coming out of the nozzle seems to get weaker and not have much if any media in it. If I clean the intake, it works fine again for a little bit, then get less effective again.

Clearing the intake is easy enough but slows down the process. (this is quite the PITA when the temps are in the 20s or lower.)

Thought on why I have to keep clearing the intake?

Thanks
tim


_______________________________________________

Shop-talk at autox.team.net<mailto:Shop-talk at autox.team.net>
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/darrellw360@mac.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20220210/c2db32f4/attachment.htm>