[Shop-talk] cutting top out of barrel

[old dirtbeard]

How about a Sawzall with the right blade?

best,
doug

On Mon, Oct 11, 2021 at 3:52 PM Mark Watson <watsonm05 at comcast.net> wrote:

> Years ago I used an air hammer (ear protection highly suggested) with a
> muffler bit like this: Mayhew Tools® - Hang Tag Pneumatic
> Muffler/Tailpipe Remover
>
> https://www.toolsid.com/mayhew-tools/hang-tag-pneumatic-muffler-tailpipe-remover-mpn-31965ht.html?singleid=3895926299
>
> Too patience and a good compressor but did an ok job.
>
> Mark Watson
>
>
> On 10/11/2021 9:44 PM john niolon <jniolon at att.net> wrote:
>
>
> got a 55 gallon barrel that held hyd fluid... need to cut the top
> out...don't want to use fire (torch) and last choice is hammer and chiselk
>
> any other suggestions ???
>
> john
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/watsonm05@comcast.net
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/dirtbeard@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20211011/27227280/attachment.htm>