[Shop-talk] cutting top out of barrel

[Mark Watson]

Years ago I used an air hammer (ear protection highly suggested) with a muffler bit like this:


Mayhew Tools® - Hang Tag Pneumatic Muffler/Tailpipe Remover

https://www.toolsid.com/mayhew-tools/hang-tag-pneumatic-muffler-tailpipe-remover-mpn-31965ht.html?singleid=3895926299

Too patience and a good compressor but did an ok job.

Mark Watson



>     On 10/11/2021 9:44 PM john niolon <jniolon at att.net> wrote:
> 
> 
>     got a 55 gallon barrel that held hyd fluid... need to cut the top out...don't want to use fire (torch) and last choice is hammer and chiselk
> 
>     any other suggestions ???
> 
>     john
> 
>     _______________________________________________
> 
>     Shop-talk at autox.team.net
>     Donate: http://www.team.net/donate.html
>     Suggested annual donation $12.96
>     Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/watsonm05@comcast.net
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20211012/18e861d1/attachment.htm>