[Shop-talk] Removing bathroom sink

[Tim .]

"...try hitting the caulk with a hair dryer too."

Or a heat gun.

________________________________
From: Shop-talk <shop-talk-bounces at autox.team.net> on behalf of Pat Horne <patintexas at icloud.com>
Sent: Tuesday, February 2, 2021 12:16 PM
To: Jim Stone <1789alpine at gmail.com>
Cc: Shop Talk <shop-talk at autox.team.net>
Subject: Re: [Shop-talk] Removing bathroom sink

Might there be any bolts holding the sink to the wall? I doubt it but it is worth a check.

You might try hitting the caulk with a hair dryer too.

Peace,
Pat

Pat Horne
We support Habitat for Humanity


On Feb 2, 2021, at 12:01 PM, Jim Stone <1789alpine at gmail.com> wrote:

I am planning on tiling the backsplash behind my bathroom sink and would like to put the tile behind the sink.  (The alternative is tiling around the sink, something I don’t think will look professional and will be a PITA.). The sink, a porcelain vessel-type basin (https://www.amazon.com/gp/product/B004LGKGIA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1), sits on top of a marble countertop.  The sink was caulked in place at the time of installation and the only thing holding it to the countertop is gravity and weight.  The only visible caulk was where the sink met the wall, which I removed.  I also worked a thin blade between the sink and the wall, cutting any caulk in there.  It doesn’t appear as thought the installer had the sink perfectly level and I don’t think there is any caulk on the left side of the sink. But. I think it is well glued by the caulk on the other three sides and I cannot get a blade in there to cut anything. The sink won’t budge.

The bathroom cabinet is floating and there is a clear shot between the bottom of the sink and the floor once the drawers have been removed.  I disconnected the drain and placed a floor jack under the sink (string on top of a couple of pieces of 1x8’s to protect the floor).  I placed a 2 ft long 4x4 under the drain hole of the sink, which is a flat area providing a good ‘jacking point’.  I can’t say how much pressure I have on the sink at the moment, but it is enough that the 4x4 won’t budge.  But, the sink still hasn’t moved, no has the countertop, as far as I can tell.  My original hope was that the jack would either break the caulk bond free or at least raise the sink just enough to be able to cut the caulk with a thin blade. So far, that hasn’t been the case.

For the moment, I am just leaving the jack in place with the sink under pressure, but I am very hesitant to put too much pressure on it.  The sink wasn’t all that expensive and I can always replace that if necessary but I really don’t want to break the countertop or risk damaging the floor.  Does anyone here have any suggestions?

Thanks,
Jim
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com

_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/tims_datsun_stuff@outlook.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20210205/f1baec0e/attachment.htm>