[Shop-talk] angle grinder spindle adapter

[john niolon]

that table moves around a lot... the face shield is hanging over my pedestal 
grinder





----- Original Message -----
From: Jeff Scarbrough <fishplate at gmail.com>
To: john niolon <jniolon at att.net>
Cc: David Scheidt <dmscheidt at gmail.com>, shop-talk <Shop-talk at autox.team.net>
Sent: 7/31/2020 5:17:46 PM
Subject: Re: [Shop-talk] angle grinder spindle adapter



Where's the face shield hanging next to them?  ;^)


On Fri, Jul 31, 2020, 17:00 john niolon <jniolon at att.net> wrote:

part time safety man for a mill maintenance/pipefitter outfit.... It's 
one thing I have to complain to them about the most





----- Original Message -----
From: David Scheidt <dmscheidt at gmail.com>
To: john niolon <jniolon at att.net>, shop-talk <shop-talk at autox.team.net>
Sent: 7/31/2020 12:41:11 PM
Subject: Re: [Shop-talk] angle grinder spindle adapter







On Thu, Jul 30, 2020 at 7:16 PM john niolon <jniolon at att.net> wrote:


my herd




good to see they all have guards on them. 



-- 

David Scheidt
dmscheidt at gmail.com
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-
talk/fishplate at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200731/41e416fd/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Img_3004.jpg
Type: image/pjpeg
Size: 63152 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200731/41e416fd/attachment-0001.bin>