[Shop-talk] Oil Extractors

[Steven Trovato]

For my boat I use something like this:

<https://www.amazon.com/Jabsco-17850-1012-DIY-Oil-Changer/dp/B001CX0WX4>https://www.amazon.com/Jabsco-17850-1012-DIY-Oil-Changer/dp/B001CX0WX4 


My boat has essentially a car engine.  The top of the dipstick tube 
is threaded to take a garden hose fitting.  My oil changer came set 
up that way.  There is also the option to use a thinner tube that 
would go down a dipstick hole.  I imagine that would be what you 
would need for your small engines.  I have been reasonably satisfied 
with it for my boat.  I warm up the engine before I start.  Warm oil 
pumps easier and quicker.  One nice thing is the pump reverses, 
and  the oil is pumped back out the hose into another container for 
recycling.  There is no awkward pouring and no funnels are involved.

-Steve T.

At 09:08 PM 1/17/2020, Bob Spidell via Shop-talk wrote:

>Folks,
>
>What do y'all use to suck oil out of small engines?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200118/7d461929/attachment.htm>