[Shop-talk] Driveway gates

[old dirtbeard]

Hi Marty,

Could you just put a coupler on the end of the existing pipe in the ground
and then insert a short new length of pipe in the coupler to clear the
new layer of gravel?

On Sat, Aug 1, 2020 at 5:52 AM marty sukey <trmarty at hotmail.com> wrote:

> I have a gravel driveway with swinging gates going back to the shop. There
> are two pipes driven into the ground that receive the drop rods on the
> gates when they are closed.  I need to add a few inches of gravel to the
> driveway and that would bury the pipes making them not very usable. Any
> ideas on home to gab these pipes and pull them up to match the new surface
> of the gravel?
>
> Thanks,
> Marty
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/dirtbeard@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200801/b058576e/attachment.htm>