[Shop-talk] misshapen hex nuts

[Larry Spector]

Maybe they're a cheap form of Jet Nut?

On Fri, May 31, 2019 at 1:12 PM Steven Trovato via Shop-talk <
shop-talk at autox.team.net> wrote:

> My son and I just replaced struts on his 2002 Toyota Avalon.  With
> the new parts we received the nuts you can see in the attached
> picture.  The hex shape is not normal.  It is as though it was
> crushed side to side.  The distance from point to opposite point is
> significantly greater for one pair of points.  No socket I have will
> fit on these.  A 15 mm socket is the closest, which is not a very
> common choice.  I was set to write this all off as crappy Chinese
> parts, but I found the same nuts with both the strut and the sway bar
> link.  They are different brands and were purchased separately. Maybe
> both buy their nuts from the same crappy nut supplier.  Anyway, I
> just thought I would check if I am missing something.  Is there some
> kind of locking nut that is intentionally made this way?
>
> -Steve T.
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/lspector@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20190531/7edda9b0/attachment.html>