[Shop-talk] rust removal follow up

[john niolon]

It was black, Tim... but the original coat on the other screws/bolts was also...  just like a carbon bolt that’s not coated  with zinc or whatever


From: Tim . 
Sent: Saturday, September 30, 2017 9:38 AM
To: shop-talk 
Subject: Re: [Shop-talk] rust removal follow up

What did the surface of the metal look like after removal from the solution? I have been using EvapoRust and do not like the way the metal is turned black. 




--------------------------------------------------------------------------------

From: Shop-talk <shop-talk-bounces at autox.team.net> on behalf of john niolon <jniolon at att.net>
Sent: Saturday, September 30, 2017 9:12 AM
To: shop-talk
Subject: [Shop-talk] rust removal follow up 

Found a product from “Krud Kutter” called ‘a must for rust’   About a 8 oz bottle for about 6 bucks
dumped it into a plastic container and loaded the carriage bolts,nuts and washers... left it in solution for
about 2 hours then took them out.... clean as a whistle.  Rinsed with water (per instructions) and dried, then 
coated with wd-40...  Looked like new.  

+1 for Krud Kutter... a good inexpensive solution... also comes in spray bottle and gallon containers

thanks for all the suggestions, guys

john


--------------------------------------------------------------------------------
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/jniolon@att.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20170930/bbac04a7/attachment.html>