[Shop-talk] exterior molding

[Matt]

Doesn't the white turn yellow?

---------- Original Message ----------
From: Brian Kemp <bk13 at earthlink.net>
To: Matt <mbarre at juno.com>, shop-talk at autox.team.net
Subject: Re: [Shop-talk] exterior molding
Date: Fri, 3 Feb 2017 16:30:25 -0800


I like PVC trim for wet areas.� If you want white, you don't have to paint.� I'm told it takes paint well.� 
 
 If you do go wood, prime and paint all sides before installation to help it last longer.
 
 Brian
On 2/3/2017 8:38 AM, Matt wrote:Question #2�Where I grew up, galvanized drip edge was the norm, where I am now, a decorative molding finishes off�underside of asphalt shingles.Unfortunately it is finger jointed wood that seems to explode and leap off the fascia when it finally rots.I figure I will go back with composite/plastic/vinyl but am concerned about latex paint peeling.Does anyone know of a source for molded in color that stands up to exterior use or have good results with paint on composite in exterior application.�I have been putting this off for some time but the wife is threatening to call in a contractor.�Thanks!

_______________________________________________Shop-talk at autox.team.netDonate: http://www.team.net/donate.htmlSuggested annual donation  $12.96Archive: http://www.team.net/archiveForums: http://www.team.net/forumsUnsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/bk13@earthlink.net 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20170204/6547b607/attachment-0001.html>