[Shop-talk] exterior molding

[Brian Kemp]

I like PVC trim for wet areas.  If you want white, you don't have to 
paint.  I'm told it takes paint well.

If you do go wood, prime and paint all sides before installation to help 
it last longer.

Brian

On 2/3/2017 8:38 AM, Matt wrote:
> Question #2
> Where I grew up, galvanized drip edge was the norm, where I am now, a 
> decorative molding finishes off underside of asphalt shingles.
> Unfortunately it is finger jointed wood that seems to explode and leap 
> off the fascia when it finally rots.
> I figure I will go back with composite/plastic/vinyl but am concerned 
> about latex paint peeling.
> Does anyone know of a source for molded in color that stands up to 
> exterior use or have good results with paint on composite in exterior 
> application.
> I have been putting this off for some time but the wife is threatening 
> to call in a contractor.
> Thanks!
>
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/bk13@earthlink.net
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20170203/f1ad08df/attachment-0001.html>