[Shop-talk] Source of special plexiglass

eric at megageek.com eric at megageek.com
Sun Apr 24 16:51:20 MDT 2016


I have a soda machine that I'm about to put back in service after 
restoring it.  It will be out in the general public.

The last piece I need is a small (about 1" high by 5" wide) piece of 
plexiglass that is 'vandal proof' (or whatever term they use.)

This will cover the LED readout, so it needs to be semi-clear.  If you 
look at any modern vending machine, they all have them.  Most a tinted 
'blueish'

Then I need to glue it to the plastic frame (this is how the original one 
was done.

Two questions...

Where can plexiglass, and what type of glue (and source) do I use?

TIA

Sent from my Commodore 64 on a 2400 Baud Modem.
Eric P
"Be as beneficent as the sun or the sea, but if your rights as a rational 
being are trenched on, die on the first inch of your territory." Ralph 
Waldo Emerson 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20160424/0dab31ca/attachment.html>


More information about the Shop-talk mailing list