[Shop-talk] L shaped fuel tank problem
John Innis
jdinnis at gmail.com
Mon Apr 18 13:19:36 MDT 2016
You need a bung hole. No, really that's what they are called! A piece of
steel tubing that is thick enough to take threads and can be welded into
thinner sheet. Make sure you get one of a materiel that matches your tank.
http://www.jegs.com/i/Currie/272/95070/10002/-1
On Sun, Apr 17, 2016 at 4:20 PM, Matt <mbarre at juno.com> wrote:
>
> I have an old steel L tank out behind the shop that goes i the back of a
> pick up and I was considering refurbishing it for diesel containment.
> Overall it is in decent condition, but I planned to clean out the inside -
> maybe some acid treatment and a coat of fresh paint on the outside.
>
> On the bottom is a half inch hole and it may have been tapped, but the
> metal is not that thick.
> Generally I would think a socket head plug would go there to act as a
> drain, but I am not sure there is enough steel there to form a reliable
> seal.
> Any ideas on how to best treat this? I could tap for a plug and try it...
>
> I considered welding or JB Welding some large washers to provide enough
> meat to allow a socket plug to work..
> Any other appropriate "stoppers" come to mind?
>
> I was also considering just sealing up the hole on the bottom and adding a
> drain on a vertical surface near the bottom.
>
>
> Matt
> Columbus, GA
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/jdinnis@gmail.com
>
>
>
--
=================================
= Never offend people with style when you =
= can offend with substance --- Sam Brown =
=================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20160418/08e9cfcc/attachment.html>
More information about the Shop-talk
mailing list