[Shop-talk] Making a hole

[Randall]

> 2. The current method is to use a circular saw blade on my dremil
> tool, similar to:
> http://www.sears.com/gyros-82-10715-saw-blade-w-mandrel-set-fine/p-
> 00931176000P?prdNo=11&blockNo=36&blockType=G36

Not sure if it would be any better, but I might try drilling holes at the
corners first.  That would reduce the amount of cleanup with the file.

I find it really tough to work to a line with a Dremel & router bit (or the
"roto-zip" bit that comes with the kit).  You might be able to put together
a quickie form though, from some lengths of 1x2 or whatever.

-- Randall